Table of Contents
Advertisement
Rev. E
REAR GU ID E BAR
(AB-7)
p'
LEFT RIBBON
HOLDER PLATE
CAL-B)
f
16-17
MM
(0.6 0.67-IN.)
!
a
RIBBON FEED - AL
Figure 5-15. LOCATING DIMENSION FOR LEFT RIBBON HOLDER PLATE
WITH RESPECT TO REAR GUIDE BAR'
b. Right Ribbon Holder Plate (AL-55) (Fig. 5-16)
(1) Maintain parallelism of bracket (AL-55) with re-
spect to printer base and apply a distance of 41-42
mm
(1.6-in.) between top of bracket and top of rear
guide bar (AB-7).
(2) Tighten mounting screws, washers (AL-93, 94, 95)
of bracket when parallelism and correct distance
has been attained.
11
I
41-42 MM
(1.6-IN. )
RIGHT RIBBON
HOLDER PLATE
(AL-55)
REAR GUIDE BAR
(AB-7)
Figure 5-16. LOCATING DIMENSION FOR RIGHT RIBBON HOLDER PLATE
WITH RESPECT TO REAR GUIDE BAR
5-40
Advertisement
Table of Contents
