Engine Stop Switch - Yamaha 40V Service Manual

– +
ELEC
Å
ı
Ç
IGNITION SYSTEM
Replacement steps:
(Except for Canada and Europe)
Remove the spark-plug cap by pulling
the spark-plug cap.
Remove the plug-cap spring.
Strip the insulation cover 5 mm (0.2 in)
a and spread the core wires outward.
Fit the plug-cap spring close to the
spread core wires and bend the spring
end for clamping.
Install the plug-cap spring into the
spark-plug cap.
Replacement steps:
(For Canada and Europe)
Remove the spark-plug cap by turning
the cap counterclockwise.
Install the spark-plug cap by turning
the cap clockwise until it stops.

ENGINE STOP SWITCH

1. Check:
Continuity
Out of specification → Replace.
Remove the
lock-plate Å
Install the
lock-plate ı
Push the button
Ç
8-13
E
Checking leads color
White Black