Warning Lamp - Yamaha 40V Service Manual

– +
ELEC
IGNITION CONTROL SYSTEM
Float
position
a OFF
a ON
Float length:
a 56.8 ~ 59.8 mm (2.24 ~ 2.35 in)

WARNING LAMP

1. Check:
LED (Light emitting diode) lighting
No lighting → Replace.
Battery voltage:
1.5 V
Yellow/Red lead → Positive terminal.
Pink lead → Negative terminal.
CAUTION:
Use only originally pen light battery (1.5 V),
other than batteries such as alkaline battery
/ higher voltage one will be burnt the diode.
NOTE:
LED has an direction for electrical current.
Therefore try reverse connection if there is
no lighting.
8-17
Checking leads color
1 P 2 B
E