Inner Cylinder Assembly; Tilt Cylinder Assembly - Yamaha 40V Service Manual

BRKT
TILT CYLINDER

Inner cylinder assembly

1. Fill:
ATF (Dexiron type 2)
to inner cylinder.
NOTE:
Depress the tilt rod fully and fill the inner
cylinder with ATF before installing the end
screw.
2. Tighten:
Inner cylinder end screw
Tilt cylinder wrench:
YB-06175-2B/90890-06544

Tilt cylinder assembly

1. Install:
Ball 1
Tilt cylinder 2
NOTE:
Apply the grease to the balls to prevent
them from falling down.
To find any ball that may fall, turn the
inner cylinder unit upside down to install
the tilt cylinder.
2. Fill:
ATF (Dexiron type 2)
to tilt cylinder.
3. Tighten:
Tilt cylinder end screw
Tilt cylinder wrench:
YB-06175-2B/90890-06544
7-32
E