FLIR Voyager II Installation Manual page 9

Step 11:
Carefully fold the metal braid back over the
grommet seal as shown
Step 12:
Trim the metal braid as shown, so that the
black o-ring seal is clear of the metal braid.
Step 13:
Slide the cable gland over the grommet seal
as shown, capturing the metal braid between
the two
Step 14:
Screw the grommet cap onto the cable gland
as shown.
You are now ready to prepare the cable ends
for connection to the Bulkhead Box's internal
termination blocks
9