Settings (4) - Husqvarna AUTOMOWER Operator's Manual

6.6 Settings (4)

From this option in the main menu you access the
settings.
• Security (4-1)
to make settings concerning PIN code, time lock,
alarm and GPS. The PIN code must be specified
for the Security menu to be shown.
• Language (4-2)
to select the menu language.
• Time and date (4-3)
to set the current time and day as well as the
required time and date format.
Security (4-1)
• PIN code (4-1-1)
Via this function you can change your PIN code
at any time.
• To change the PIN code: Move the cursor to
PIN code and press YES. Place Automower
the charging station. Enter the new PIN code
and press YES. Enter the same code again to
confirm, and press YES.
When the PIN code has been changed, the
message PIN code changed is displayed for a
few seconds. The Security menu will then
appear again.
• Time lock (4-1-2)
This function partly involves Automower
stopping to mow after a predetermined number
of days and not continuing until the correct PIN
code has been entered, and partly that the PIN
code must be entered when the main switch is
set to the ON position. The default setting on
Automower ® is 30 days, but can be changed as
required.
IMPORTANT INFORMATION
Time lock is the most important
theft-prevention function. Accordingly, it is
recommended to have this activated.
To:
• Activate: Move the cursor to Time lock and press
YES. Now move the cursor to Number of days
and press YES. Specify how many days you
would like Automower
requests the PIN code. Finish by pressing YES.
58 - English
6. MENU FUNCTIONS
in
®
®
to mow before it
®
Commands
Timer
Installation
Settings
4
Security
Language
Time and date
4-1
PIN code
Number of
days
Time lock
OFF
Alarm
GPS
4-1-2
Security
Language
Time and date
4-
PIN code
Time lock
Alarm
GPS
4-1-1
_ _ days