Settings; Schedule; Cutting Height; Pattern - Husqvarna CEORA Operator's Manual

The product has factory settings but the settings can be
adapted to each work area.

4.1 Schedule

Schedule menu you can change the schedule
In
settings for the product. You can set separate schedule
Secondary areas cannot be
settings for each work area.
scheduled.
The schedule function controls which hours the product
is permitted to operate. When the product does not
operate, it is parked in the charging station. You can
see which hours and days the product operates in the
schedule overview in the app.
The table shows the approximate number of hours the
product must operate each day for a specified area
dimension.
™
Area CEORA
EPOS
2
5 000 m / 6 h
1.25 acre
2
10 000 m / 12 h
2.5 acre
2
15 000 m / 18 h
3.75 acre
2
20 000 m / 24 h
5 acre
2
25 000 m / -
6.25 acre
There are 3 different quality levels that you can select
which decides the cutting frequency:
• Pro sport quality: Used for everyday care of sports
fields or golf courses at low cutting height. For a
well managed, lush and dense turf.
• Pro quality: For facilities with high demands on
grass quality. Medium grass height and normal
dense quality of turf. The grass is cut every second
day.
• Regular quality: For turf with low level of grass
growth. High cutting height and normal to low
dense quality of turf. The grass is cut two times
per week.

24 - Settings

4 Settings
™
544 CEORA 546
EPOS
5 h
10 h
14 h
19 h
24 h
Quality
Pro sport quality
Pro quality
Regular quality

4.2 Cutting height

Note:
Soil type, grass type and surface type can
cause different cutting heights. For convex surfaces the
cutting height becomes lower than the average cutting
height. For concave surfaces the cutting height becomes
higher than the average cutting height. There is a risk of
scalping on convex surfaces.
The cutting height is set individually for each work area.

4.3 Pattern

The settings for the systematic cutting is set for each
work area. You can do these settings:
• Set the pattern for how the product operates.
• Set the direction of the pattern.
Border mowing . With Fixed
• Set the type of the
border mowing the product always operates in
the same paths to keep a sharp border around
Variable border mowing , the
the work area. With
product operates in different paths to decrease the
risk of track marks along the virtual boundary.
• Set a pattern that includes a number of directions
in work areas that includes many obstacles and
stay-out zones.

4.4 Operation

In the Operation menu you can change the settings of
Object avoidance and ECO mode .
the
Operation frequency
Each day
Each second day
Each third day
1691 - 006 - 09.01.2023