Husqvarna AUTOMOWER Operator's Manual page 52

Exit angles (3-1)
Normally Automower
direction within the exit sector 90°-270°, where 90° is
called the Start angle and 270° is called the End
angle. By setting the start and end angles, you can
set the direction in which Automower
charging station.
• Reversing distance (3-1-1)
Specify the number of centimeters you want
Automower to reverse before it turns to drive out
of the charging station.
The default reversing distance is 60 cm (24").
• Start angle 1 (3-1-2)
Specify in degrees where you want the
sector/sector 1 to start.
• End angle 1 (3-1-3)
Specify in degrees where you want the
sector/sector 1 to end.
Follow loop (3-2)
These functions in this sub-menu are for situations
when the mower needs to be guided to reach remote
areas, to find the charging station more easily, and to
determine at what distance the mower shall follow the
loop. You will also find test functions here to see how
different charge exit settings work and how the
mower finds its way into the charging station.
• Follow loop out (3-2-1)
This function means that Automower
to follow the boundary wire or a guide wire away
from the charging station to reach a more remote
area of the garden. This function is very useful in
gardens where the front and back are joined by a
passage where the charging station cannot be
placed.
When this function is activated Automower
follow the boundary wire or guide wire away from
the charging station in the set direction. It will
start mowing when it reaches the area.
52 - English
6. MENU FUNCTIONS
leaves the charging station in a
®
® is to leave the
® can be set
Exit angles
Follow loop
Installation shape
Advanced
Exit angles
Follow loop
Installation shape
Advanced
® will
Reversing dist.
Start angle 1
End angle 1
3-1
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
3-2
3-1-
3-2-