Presentation - Husqvarna AUTOMOWER Operator's Manual

2. Presentation

This chapter contains information you should be aware
of when planning the installation.
An installation of Husqvarna Automower
main components:
Automower ® , an automatic lawn mower that mows
the lawn by moving in essentially an irregular pattern.
The mower is powered by solar energy in
combination with a maintenance free battery.
Charging station, where your Automower
when the charge level in the battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send out signals so Automower
charging station.
• To charge Automower
Transformer, which is connected between the
charging station and a 120V(230V) wall socket. The
transformer is connected to the wall socket via an
integrated power cord and to the charging station via
a 66 ft(20 m) long low voltage cable. The low voltage
cable must not be shortened nor extended.
Wire, laid in a loop around Automower
area. The boundary wire is laid around the edges of
the lawn and around objects and plants that the
mower must not run into. The wire is also used for
any guide wires.
The wire supplied with the installation is 1300 ft long.
If this is not sufficient more wire can be purchased,
with a connector, and spliced onto the existing wire.
10 - English
2. PRESENTATION
® includes four
returns
®
® finds the
® battery.
's working
®