Charging The Battery - Husqvarna AUTOMOWER Operator's Manual

3. Connect the low voltage cable to the charging
station.
Only use original cable and transformer.
4. Connect the low voltage cable to the
transformer.
The connectors may be slightly difficult to
connect, as they are moisture-proof.
5. Connect the transformer's power cord to a 120 V
wall socket. It is preferable to use an earth-fault
breaker as recommended.
IMPORTANT INFORMATION
Do not tread or walk on the charging station
plate.

3.3 Charging the battery

Automower ® is supplied with an uncharged battery. As
soon as the charging station is connected, it is possible
to charge the mower.
1. Set the main switch to the ON position.
2. Place Automower ®
charge the battery while you are laying the
boundary wire.
From an uncharged state the battery takes about
1 to 2 hours until it is fully char
IMPORTANT INFORMATION
Automower cannot be used before the
®
installation is complete.
3. INSTALLATION
in the charging station to
ged.
English - 21