Settings - Husqvarna AUTOMOWER 320 NERA Operator's Manual

2. If the indicator LED lamp does not have a green
light, do a check of the installation. Refer to
indicator of the charging station for boundary wire
®
Use the Automower Connect app for product settings.
The factory settings are applicable for almost all work
areas, but the settings can be adapted to the conditions
for each work area.
37.1 Schedule
Schedule function controls which hours the product
The
Schedule if the work area is
operates. You can set the
less than the maximum area capacity of the product.
This prevents wear on the grass and the product.
37.2 Cutting height
The cutting height can be set to 2-6 cm / 0.8-2.4 in.
Use the TargetHeight function to lower the cutting height
automatically from maximum to the specified cutting
height gradually during 10 days.
37.3 Operation
In Operation you can change the operation settings
Weather timer and ECO
of the product. This includes
mode .
37.4 Installation
You can use the factory setting for the installation of
the product for most work areas. You can set manual
installation settings if it is necessary for your work area.
You can only set manual installation settings if you
install the product with boundary wire.

100 - Settings

installation on page 103 and To install the charging
LED station on page 97 .
37 Settings
37.5 Accessories
Accessories menu you can set the settings for the
In the
accessories of the product, for example the settings for
®
Automower house and FlexiFence accessory. Speak
to your local Husqvarna representative for information
about which accessories that are available for your
product.
37.6 General
General menu you can set the time and date, or
In the
reset to factory settings.
This menu is only available when your mobile device is
connected to the product with Bluetooth
37.7 Security
Security menu you can set the GeoFence and
In the
change the PIN code.
37.8 Automower
®
Automower Connect you can enable or disable the
In
Automower ® Connect function. You can connect the
product to a Wi-Fi network to find more information
about for example connectivity and signal strength.
This menu is only available when your mobile device is
connected to the product with Bluetooth
®
.
®
Connect
®
.
1910 - 002 - 03.01.2023