Draytek Vigor2860 Series User Manual page 97

D e t a i l s P a g e f o r M
D e t a i l s P a g e f o r M
V D S L 2 )
V D S L 2 )
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use Static or Dynamic IP as the accessing protocol of the Internet, select Static or
Dynamic IP from the WAN>>Internet Access >>WAN1 page. The following web page will
appear.
Available settings are explained as follows:
Item
Enable/Disable
Modem Setting (for
ADSL only)
WAN Connection
Detection
P o A / S t a t i c o r D y n
P o A / S t a t i c o r D y n
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
It is not necessary to configure settings in these fields for
modem settings are prepared for ADSL only.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
87
a m i c I P i n W A N 1 (
a m i c I P i n W A N 1 (
P h y s i c a l M o d e :
P h y s i c a l M o d e :
Vigor2860 Series User's Guide