Draytek Vigor2860 Series User Manual page 359

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 Series:

Table of Contents

automatically on the page. If you cannot find out a suitable

one, please choose User Defined and fill out the

corresponding values for dial tone, ringing tone, busy tone,

congestion tone by yourself for VoIP phone.

Also, you can specify each field for your necessity. It is

recommended for you to use the default settings for VoIP

communication.

Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume

of microphone and speaker by entering number from 1- 10.

The larger of the number, the louder the volume is.

Dial Tone Power Level - This setting is used to adjust the

loudness of the dial tone. The smaller the number is, the

louder the dial tone is. It is recommended for you to use the

default setting.

Call Waiting Tone Power Level - This setting is used to

adjust the loudness of the call waiting tone. The smaller the

number is, the louder the tone is. It is recommended for you

to use the default setting.

Interdigit Timeout –Type a value in this field to specify

time limit for interdigit.

DTMF Mode – There are four DTMF modes for you to

InBand - Choose this one then the Vigor will send the

DTMF tone as audio directly when you press the

Vigor2860 Series User's Guide