Draytek Vigor2860 Series User Manual page 115

D e t a i l s P a g e f o r 4
D e t a i l s P a g e f o r 4
To use 4G USB Modem (DHCP mode) as the accessing protocol of the internet, please
choose Internet Access from WAN menu. Then, select 4G USB Modem (DHCP mode) for
WAN3. The following web page will be shown.
Available settings are explained as follows:
Item
Modem Support List
4G USB Modem (DHCP
mode)
SIM PIN code
Network Mode
APN Name
MTU
After finishing all the settings here, please click OK to activate them.
G U S B M o d e m ( D
G U S B M o d e m ( D
Description
It lists all of the modems supported by such router.
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 19
characters.
Force Vigor router to connect Internet with the mode
specified here. If you choose 4G/3G/2G as network mode,
the router will choose a suitable one according to the actual
wireless signal automatically.
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click Apply.
The maximum length of the name you can set is 47
characters.
It means Max Transmit Unit for packet. The default setting is
1380.
105
H C P m o d e ) i n W A
H C P m o d e ) i n W A
N 3 / W A N 4
N 3 / W A N 4
Vigor2860 Series User's Guide