Draytek Vigor2860 Series User Manual page 335

Mode
BSSID
Security
Signal (%)
Beacon Period
Last Detected
All the APs detected by Vigor router will be treated as unknown APs. You have to specify
which AP is friendly and which one is Rogue respectively. Follow the steps below to perform
the classification of access points.
1. Click the radio button on one of the access points. In this case, DrayTek-LAN-A is
selected.
2. Later, some options will appear on the bottom of the page.
Available settings are explained as follows:
Item
AP's MAC Address
AP's SSID
Add to
Display the mode (AP or Ad Hoc) used by the detected access
point.
Display the MAC address of the detected access point.
Display the encryption mode used by the access point.
Display the signal strength (represented by percentage) sent by
the access point.
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Display the data and time that such access point detected by
Vigor router.
Description
The MAC address of the selected AP will be displayed here
automatically.
The SSID of the selected AP will be displayed here
automatically.
Friendly APs - If the selected AP shall be treated as Friendly
AP, simply click Add to change its classification from
325
Vigor2860 Series User's Guide