Draytek Vigor2860 Series User Manual page 365

Channel
Hide SSID
SSID
Isolate
Rate Control
For 5 GHz: At present, the router can connect to 11a Only,
11n Only(5 GHz), Mixed (11a+11n) stations
simultaneously. Simply choose Mixed (11a+11n) mode.
In which, 802.11b/g operates on 2.4G band, 802.11a
operates on 5G band, and 802.11n operates on either 2.4G
or 5G band.
Means the channel of frequency of the wireless LAN. The
default channel is 6. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select Auto to let system
determine for you.
For 2.4GHz:
Check it to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your
wireless LAN. Depending on the wireless utility, the user
may only see the information except SSID or just cannot
see any thing about Vigor wireless router while site
surveying. The system allows you to set four sets of SSID
for different usage. In default, the first set of SSID will be
enabled. You can hide it for your necessity.
Means the identification of the wireless LAN. SSID can be
any text numbers or various special characters.
Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each other.
VPN – Check this box to make the wireless clients
(stations) with different VPN not accessing for each other.
It controls the data transmission rate through wireless
355
For 5 GHz:
Vigor2860 Series User's Guide