Log & Alert - Draytek Vigor2860 Series User Manual

Advanced
CPE VPN Connection List
VPN
Type
Remote IP
Virtual Network
Tx Pkts
Tx Rate(Bps)
Rx Pkts
Rx Rate(Bps)
UP Time
3 3 . . 1 1 3 3 . . 4 4 L L o o g g & &
This page offers brief information to identify the CPE connected to Vigor2860 series.
Available settings are explained as follows:
Vigor2860 Series User's Guide
List.
To build a VPN connection with detailed configuration (such
as PPP authentication and VJ compression), click Advanced.
Specify the remote CPE from the Device drop down list; select
PPTP or IPsec as the Dial Type; choose PAP only or PAP or
CHAP as PPP authentication; enable (ON) or disable (OFF) VJ
Compression; then click OK to build the VPN connection
Display the name of the LAN-to-LAN profile.
It is generated automatically when you click the
PPTP/IPsec/Advanced button to build the VPN connection
between Vigor2860 and remote CPE.
Display the dial-in type and the authentication method.
Display the IP address of the remote CPE and the interface.
Display the IP address and subnet mask of Vigor2860 series.
Display the number of the transmitted packets.
Display the number of the transmitted rate.
Display the number of the received packets.
Display the number of the received rate.
Display the connection time of such VPN.
A A l l e e r r t t
314