Draytek Vigor2860 Series User Manual page 498

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 Series:

Table of Contents

A dialog box will be popped up. Choose Range Address as Address Type by using the

drop down list. Type 192.168.1.10 in the field of Start IP, and type 192.168.1.20 in the

field of End IP. Then, click OK to save the settings. The computers within the range can

access into the Internet.

Now, check the content of Source IP is correct or not. The action for Filter shall be set

with Pass Immediately. Then, click OK to save the settings.

Vigor2860 Series User's Guide