Draytek Vigor2860 Series User Manual page 87

Physical Mode
DSL Mode
Physical Type
DSL Modem Code
Line Speed (Kpbs)
VLAN Tag insertion
(ADSL)
VLAN Tag insertion
(VDSL2)
Display the physical mode of such interface. If VDSL2 is
detected, this field will display "VDSL2"; if ADSL is
detected, it will display "ADSL".
Specify the physical mode (VDSL or ADSL) for such
router manually.
For such interface, no type can be selected.
Choose the correct DSL modem code for ensuring the
network connection.
If you have no idea about the selection, simply choose
Default or contact the dealer for assistance.
If your choose According to Line Speed as the Load
Balance Mode in previous page, please type the line speed
for downloading and uploading for such WAN interface.
The unit is kbps.
The settings configured in this field are available for ADSL.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets
on the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
The settings configured in this field are available for
VDSL2.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets
on the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
77
Vigor2860 Series User's Guide