Draytek Vigor2860 Series User Manual page 99

DNS Server IP Address
After finishing all the settings here, please click OK to activate them.
D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
Available settings are explained as follows:
Item
Enable/Disable
Modem Settings
(for ADSL only)
address.
Default MAC Address – Type in MAC address for the
router. You can use Default MAC Address or specify
another MAC address for your necessity.
Specify a MAC Address – Type in the MAC address for
the router manually.
Type in the primary IP address for the router. If necessary,
type in secondary IP address for necessity in the future.
P P o E / P P P o A i n W
P P o E / P P P o A i n W
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Set up the DSL parameters required by your ISP. These
settings configured here are specified for ADSL only.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access >> Multi
PVCs. Select M-PVCs Channel means no selection will be
chosen.
89
A N 1 ( P h y s i c a l M o
A N 1 ( P h y s i c a l M o
d e : A D S L )
d e : A D S L )
Vigor2860 Series User's Guide