To Begin Operation; Environment And Device Requirements; Network Connection And Settings; Connection To Network - Konica Minolta bizhub C452 Network Function Manual

4.1

To begin operation

4 Registering the basic information
This section explains the necessary settings and registrations before using the fax and scan functions of this
machine.
4.1 To begin operation
The following registrations are required in order to use this machine.
4.1.1

Environment and device requirements

The following environment and devices must be prepared to use various functions of this machine.
Functions
Network scan function
G3 fax function
Network fax function
4.1.2

Network connection and settings

Connection to the network and the network settings are required to use the function of this machine that
sends image data over the network, such as the Network Scan and Network Fax functions.

Connection to network

Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.
bizhub C652/C652DS/C552/C552DS/C452
Environment and device
•
•
•
•
Internet Fax •
•
IP Address Fax •
•
•
Connection to network
Network settings
Optional fax kit FK-502 installed
Connection of modular cable
Connection to network
Network settings
Optional fax kit FK-502 installed
Connection to network
Network settings
4
4-2