Using The On-Screen Menus; Showing The Menu On The Tv Screen; Activating The Surround Modes; Activating The Dsp Modes - JVC RX-8012VSL Service Manual

Using the On-Screen Menus

You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TV's input mode to the proper position to which the receiver is connected.
• When the TV's input mode is incorrect; for example, if a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
When you press MENU, "MENU"
appears on the display window
for about 10 seconds.
CATV/DBS VCR 1 TV AUDIO
DVD DVD MUILTI CD
FM/AM
TV/DBS VIDEO CDR PHONO
VCR 1 VCR 2 TAPE/MD USB
SURROUND DSP ANALOG/DIGITAL SLEEP
ON/OFF MODE INPUT
BASS ROOM
LINE DIF .ECT BOOST EFFECT SIZE
1 2 3
MIDNIGHT MENU
MODE TEST CTR TONE LIVENESS
4 5 6
∗ ∗ ENTER ∗
SOUND SUBWFR L/R BAL CENTER
8 9
7/P
∗ ∗ ∗
MUTING DIGITAL EQ REAR L REAR R
0
10 +10
100 +
RETURN FM MODE MENU
CATV/DBS
∗
CONTROL CONTROL BAL L
+ + +
∗
CH/ LEVEL TV VOL VOLUME
TV/VIDEO − − −
∗
BAL R
PLAY
MENU EXIT
TEXT
/REW FF/
PAUSE
DISPLAY
SET
REC
DOWN – TUNING – UP
PAUSE
STOP
CONTROL
RM-SRX8012U
A/V CONTROL RECEIVER

Showing the MENU on the TV Screen

Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
Notes:
• "INPUT" appears only when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected. (See page 19.)
• The on-screen display will disappear if no operation is done for
about 1 minute.
• The on-screen display is shown in black and white.
PLAY
EXIT
/REW FF/
PAUSE
SET
DOWN – TUNING – UP
STOP
Use 5 / ∞ to move
up and down, and 2 / 3
to select, adjust or set
the item.

Activating the Surround Modes

(Also see page 27)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "SURROUND."
3. Press 2 / 3 to select the
Surround mode you
want to use.
4. When you finish, press
EXIT.
The menu disappears from the TV.

Activating the DSP Modes

(Also see pages 28 – 34)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "DSP MODE."
3. Press 2 / 3 to select
the DSP mode you want
to use.
4. When you finish, press
EXIT.
The menu disappears from the TV.
Note
If "DVD MULTI" is selected as a playing source, the "SURROUND
MODE" and "DSP MODE" do not appear on the display.

Selecting the Analog or Digital Input Mode

(Also see page 20)
This selection is only possible when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected (see page 19).
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press 5 / ∞ to move
to "INPUT."
3. Press 2 / 3 to select
the analog or digital
input mode you want.
4. When you finish, press EXIT.
The menu disappears from the TV.
36