Activating The Dsp Modes - JVC RX-8040B Instructions Manual

All channel stereo mode
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.
• If the surround speakers are set to "NONE," you cannot select
"ALL STEREO."
Sound reproduced from normal stereo
Sound reproduced from All Channel Stereo mode

Activating the DSP Modes

Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments (see pages 32 to
41).
You can also use the buttons on the remote control for the same
functions.
IMPORTANT:
Check the following before or while using the buttons and controls.
For Zone 1 operations:
The ZONE 1 indicator lights up on the unit's display.
• When using the unit:
– "ZONE2" is not shown in the unit's main display.
• When using the remote control:
– Set the ZONE 1/ZONE 2 selector to ZONE 1.
– Check the indication shown on the remote's display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either for ZONE 1 or
ZONE 2) for about two hours.
ZONE 1 ZONE 2
Ex. When you press DSP with ZONE 1/ZONE 2 selector set
to ZONE 1.
AUDIO POWER
STANDBY ON
ZONE 2
ZONE 1
ZONE 1 ZONE 2 TV/CATV/DBS DVD
ON/OFF ON/OFF POWER POWER
ZONE 1
DVD
VCR 1 VCR 2
TV/DBS VIDEO
1. Select and play any source excluding DVD
MULTI.
• Make sure you have selected the analog or digital input mode
correctly.
• DSP modes are not valid for DVD MULTI playback mode.
2. Press DSP repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP modes change as
follows:
DIGITAL AUTO
L C R
LINEAR PCM
SUBWFR DIGITAL
LS RS
= =
HALL 1 HALL 2
= =
DANCE CLUB PAVILION
= =
THEATER 1 THEATER 2
= (Back to the beginning)
*
1 When the surround speakers are set to "NONE," you cannot
select "ALL STEREO."
* 2
When multi-channel signals come in, you cannot select
"MONO FILM."
Note:
When the Zone 2 speakers are activated or the surround speakers
are set to "NONE," the 3D-PHONIC processing is applied to the DSP
modes (the 3D-PHONIC indicator also lights up).
To adjust the effect level (except All Channel Stereo), see page
41.
To cancel the DSP modes
Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote
control).
ANALOG
L R LINEAR PCM
SUBWFR
PHONO CD
TAPE/MD CDR
FM AM
DSP SURR / DSP
OFF
DSP SPEAKERS 1
VOLUME
ZONE 1
=
LIVE CLUB
=
ALL STEREO*
1
=
MONO FILM*
2
SPEAKERS 1
VOLUME
ZONE 1
49