Contura C i4 FS Installation Instructions Manual page 10

GB
10 INSTALLATION
Adjusting and connecting
Adjusting the stove
• Position the stove on the hearth plate.
• Adjust the height of the four adjustable feet until
the stove is horizontal.
After the stove has been adjusted and positioned according
to the installation distances, connection to the chimney is
carried out.
Put stove cement inside the flue connection and press the pipe
into the connection.
Continue the chimney installation according to the chimney
installation instructions.
It is very important that the installation is inspected by an authorised chimney sweep before the
stove is used. Also read the "Operating instructions", before lighting for the first time.
Final inspection of the installation