Audio-Video System Basic Operation - Winnebago Destination Manual Manual

TV Signal Amplifier Power Switch
To Watch Cable TV
• Power "OFF" the TV Signal Amplifier Power
Switch. All TV's in the coach will now be
connected to the cable TV (via coax cable)
and set TV to be viewed through cable TV
input.
AUDIO-VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
"A/V System Basic Operation" guide in
Section 8 of your Operator's Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.
DVD HOME THEATER SYSTEM
–If Equipped
The available DVD home theater system
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped).
The TV is connected to the home theater
system, which plays through theater speakers in
the lounge area of the coach.
Connect Theater
Speakers
• Press the SPEAKERS
switch on the dash to
TV position to connect
the theater speakers to the home theater
system.
NOTE:The Aux. Battery Disconnect switch must
also be on while listening to theater
sound because the audio relay is powered
by house batteries. If the Aux. Battery
Disconnect switch is off, the speakers
will not emit any sound.
Set TV Video Input
(If equipped with one main TV)
• Turn On both TV and
DVD player.
• Press SOURCE or
INPUT button on the
remote or front of TV
and select "Component" input on the TV.
The TV screen will display the DVD player
logo when the correct input is selected.
(If equipped with 2nd main TV)
• Turn On both TV's and DVD player.
• Press SOURCE or INPUT button on the
remotes or front of TV's and select
"Component" input on both TV's.
• The DVD player logo
will be simultaneously
displayed on both TV's
when the correct input is
selected
Play DVD with Theater Sound
• Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING."
SECTION 8 –
ENTERTAINMENT
8-3