Bunk Beds - Folding - Winnebago Destination Manual Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
Power Lift/Lower Control Switch
(Located on Bedroom Nightstand)
-Typical View
• Press the control switch UP to raise the head
of the bed.
• Press the control switch DOWN to lower the
head of the bed.
NOTE: This power lift/lower mechanism is
equipped with an interlock feature, which
will not allow you to retract the bedroom
slideout unless the bed is in a 90-degree
upright position.

BUNK BEDS - FOLDING

–If Equipped
(Typical view – your coach may differ)
Storing Bunk to Create Additional
Wardrobe Space:
1. Remove top bunk cushion and lay on top of
bottom bunk cushion.
9-6
2. Lift up top bunk board and align the latch with
the wall bracket.
Latch
3. Insert latch into the wall bracket completely to
secure bunk board to the wall.
NOTE: After fully engaged, rotate the latch
down so it is laying flush (horizontally)
against the bed board edge to lock the
latch in for security.
Wall Bracket