Display head back panel
Description
Display head back panel (includes top access door)
1.
Prepare the computer for disassembly
2.
Remove the VESA plate cover
3.
Remove the display head from the stand
on page
4.
Open the top access door
5.
Loosen the two large, captive Torx screws at the top of the computer.
6.
Loosen the two smaller, captive Torx screws in the upper corners of the rear I/O area (1).
52).
(Opening the top access door on page
(Preparation for disassembly on page
(VESA plate cover on page
(Removing the display head from the stand
Spare part number
712401-001
19).
23).
24).
Display head back panel
53