USB+PWR 24V and Cash drawer port daughter card
Description
USB+PWR 24V and Cash Drawer port daughter card
1.
Prepare the computer for disassembly
2.
Remove the VESA plate cover
3.
Remove the display head from the stand
on page
4.
Remove the display head back panel
5.
With the heat sink installed, remove the two Torx screws (1) that secure the board to the
computer.
6.
Lift the card up to disconnect it from the system board connector (2).
7.
Slide the card out from under the heat sink and remove the card from the computer (3).
To install the USB+PWR 24V and Cash Drawer port daughter card, reverse the removal procedure.
60
Chapter 4 Removal and replacement procedures
(VESA plate cover on page
52).
(Preparation for disassembly on page
23).
(Removing the display head from the stand
(Display head back panel on page
Spare part number
702775-001
19).
53).