Ricoh C23535 Operating Instructions Manual page 1750

Appendix
❖ If the network area provides poor ra-
dio environment
Where radio wave conditions are
bad, the network may not function
due to interrupted or failed con-
nections. When checking the wire-
less LAN signal and the access
point, follow the procedure below
to improve the situation:
• Position the access point nearer
to the machine.
• Clear the space between access
point and machine of obstruc-
tions.
4
• Move radio wave generating
appliances, such as micro-
waves, away from the machine
and access point.
Note
❒ For information about how to
check radio wave status, see the
General Settings Guide.
❒ For more information about access
point radio wave conditions, refer
to the access point manual.
124