Ricoh C23535 Operating Instructions Manual page 1718

Monitoring and Configuring the Printer
Not Detected: Finisher
Not Detected: Fusing Unit
Not Detected: Input Tray
Not Detected: Interposer
Not Detected: LCT
2
Not Detected: Magenta Toner
Not Detected: PCU
Not Detected: PCU (C)
Not Detected: PCU (K)
Not Detected: PCU (M)
Not Detected: PCU (Y)
Not Detected: Transfer Roller
Not Detected: Transfer Unit
Not Detected: Tray 1
Not Detected: Tray 1 (LCT)
Not Detected: Tray 2
Not Detected: Tray 3
Not Detected: Tray 3 (LCT)
Not Detected: Tray 4
Not Detected: Tray 5
Not Detected: Tray 6
Not Detected: Tray 7
Not Detected: WasteToner Bottle
Not Detected: Yellow Toner
Not Reached, Data Deleted
Offline
Original on Exposure Glass
Operating Thermo-range Error
Panel Off Mode
Panel Off Mode>>Printing ava.
Paper in Duplex Unit
Paper in Finisher
Paper Misfeed: ADF
Paper Misfeed: BookletProcessor
Paper Misfeed: Duplex Unit
92
Messages Description
Finisher is not correctly set.
The fusing unit is not correctly set.
The paper feed tray is not correctly set.
Interposer unit is not correctly set.
A large amount of paper feed tray is not correctly set.
Magenta toner is not correctly set.
The photoconductor unit is not correctly set.
The photoconductor unit (cyan) is not correctly set.
The photoconductor unit (black) is not correctly set.
The photoconductor unit (magenta) is not correctly set.
The photoconductor unit (yellow) is not correctly set.
The transfer roller is not correctly set.
The transfer unit is not correctly set.
Tray 1 is not correctly set.
The large capacity tray (tray 1) is not correctly set.
Tray 2 is not correctly set.
Tray 3 is not correctly set.
The large capacity tray (tray 3) is not correctly set.
Tray 4 is not correctly set.
Tray 5 is not correctly set.
Tray 6 is not correctly set.
Tray 7 is not correctly set.
Waste toner bottle is not correctly set.
Yellow toner is not correctly set.
Unreached job is deleted.
Printer is offline.
The original remains on the exposure glass.
The machine is operating outside the permissible tem-
perature range.
The machine is in Panel-Off mode.
The machine is in Control Panel-Off mode.
The paper remains in the duplex unit.
The paper remains in Finisher.
The paper has jammed in Document Feeder.
The paper has jammed in booklet finisher.
The paper has jammed in the duplex unit.