Ricoh C23535 Operating Instructions Manual page 1511

Specifying the path to a destination folder in an NDS tree or on a NetWare server by
browsing the network
You can browse the network and specify the path to a destination folder in an
NDS tree or on a NetWare server.
A
Press [Manual Entry].
B
Press [NCP].
C
Select the connection type. Press [NDS] to browse the NDS tree. Press [Bind-
ery] to browse the NetWare server.
D
Press [Browse Network] under the path name field.
If you selected [NDS] under [Connection Type], the NDS tree list appears.
If you selected [Bindery] under [Connection Type], the NetWare server list ap-
pears.
E
Search for the destination folder in the NDS tree or NetWare server.
If you cannot find the destination folder, press [Up One Level], and then search
for the folder at that level.
F
Select the destination folder.
G
Press [OK] twice.
Note
❒ If you change the protocol after entering the path name, user name, or
password, a confirmation message appears.
❒ Only folders that you have the read privileges for are displayed.
❒ If the language used for the NDS tree or by the NetWare server differs from
that used by the machine, file names in the NDS tree or on the NetWare
server might appear garbled.
❒ Up to 100 items can be displayed.
Specifying Scan to Folder Destinations
2
57