Figure 2-20 Connectors On The Netra Cp2500 Host Rear Transition Module (Rtm-H) - Sun Microsystems Netra CT 410 Manual

Cut out for
PIM connector
10/100/1000 Ethernet
RJ-45 connectors
Serial ports
10/100/1000 Ethernet
RJ-45 connectors
Connectors on the Netra CP2500 Host Rear Transition Module (RTM-H)
FIGURE 2-20
11. After you replace the rear transition module, obtain the new Netra CP2500 board.
12. Go to the front of the server and install the new board, as described in the
following section.
ENET 1
ENET 0
COM
A B
USE ONLY
WITH CP2500
ENET 3
ENET 2
HOST RTM
Chapter 2 Upgrading the Hardware 29