Table of Contents
Advertisement
Host Port Connections
Host Port Connections
The following settings define the basic transmission speeds and digital standards that
ensure common formatting.
Baud Rate, Host Port
Usage:
Can be used to transfer data faster or to match host port settings.
Definition:
The rate at which the reader and host transfer data back and forth.
Serial Cmd:
<K100,baud
Default:
9600
Options:
1 = 1200
4 = 9600
Parity, Host Port
Usage:
Only changed if necessary to match host setting.
Definition:
An error detection routine in which one data bit per character is set to 1 or 0
so that the total number of bits in the data field is either even or odd.
Serial Cmd:
<K100,baud rate,parity,stop bits,data bits>
Default:
Even
Options:
0 = None
Stop Bits, Host Port
Usage:
Only changed if necessary to match host setting.
Definition:
One or two bits added to the end of each character to indicate the end of
the character.
Serial Cmd:
<K100,baud
Default:
One
Options:
0 = One
Data Bits, Host Port
Usage:
Only changed if necessary to match host setting.
Definition:
One or two bits added to the end of each character to indicate the end of
the character.
Serial Cmd:
<K100,baud rate,parity,stop
Default:
Seven
Options:
0 = Seven
3-4
rate,parity,stop bits,data bits>
2 = 2400
5 = 19.2K
1 = Even
rate,parity,stop
bits,data bits>
1 = Two
bits,data
1 = Eight
3 = 4800
6 = 38.4K
2 = Odd
bits>
MS-2 CCD Reader User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-2 and is the answer not in the manual?
Questions and answers