116
Maintenance Recommendations
Fuel System Primary Filter (Water Separator) Element - Replace
Illustration 91
Typical example
3. Install a suitable tube onto drain (3). Open the drain
valve (2). Rotate the drain valve counterclockwise.
Two full turns are required.
4. Loosen the vent screw (1).
5. Allow the fuel to drain into the container. Remove
the tube from the drain valve.
6. Tighten the vent screw (1) securely . Remove the
wiring harness from connection (4).
7. Rotate filter bowl (6) counterclockwise and remove
the filter bowl from assembly.
g03086757
Illustration 92
Typical example
8. Rotate the filter element (5) counterclockwise and
remove the filter element . Clean the filter bowl.
Install the New Filter Element
SEBU8732
g02148402