Table of Contents
Advertisement
108
Maintenance Recommendations
Engine Crankcase Breather Element - Replace
4. Install a new filter element into the breather body
(3). Ensure the correct position of the element,
refer to illustration 80 . Align position (A) on the top
cap to position (B) on the filter element.
Illustration 81
Typical example
5. Install the top cap (1). Rotate the top cap by hand
clockwise until the top cap locks into the locked
position (C) on the breather body.
6. Remove the container.
Bottom Service
Ensure that dirt cannot enter the breather assembly.
Illustration 82
Typical example
(X) Alignment mark
(Y) Alignment mark
1. Ensure that the outside body of the breather
g02346577
assembly is clean and free from damage. Place a
container under the breather.
2. Remove the tube connection (1). Ensure that dirt
cannot enter the tube connection. Note the position
of the alignment marks (X and Y). Rotate the
bottom cap (2) counterclockwise in order to
release the cap and the filter element (4) from the
breather body (3).
SEBU8732
g02346498
Advertisement
Chapters
Table of Contents
