82
Refill Capacities
Fluid Recommendations
NOTICE
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
Diesel Fuel Requirements
Perkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
technological societies.
The Perkins Specification for Distillate Diesel Fuel
provides a known reliable baseline in order to judge
the expected performance of distillate diesel fuels
that are derived from conventional sources.
Satisfactory engine performance is dependent on the
use of a good quality fuel. The use of a good quality
fuel will give the following results: long engine life and
acceptable exhaust emissions levels . The fuel must
meet the minimum requirements that are stated in the
table 23 .
NOTICE
The footnotes are of the key part Perkins Specifica-
tion for Distillate Diesel Fuel Table. Read ALL of the
footnotes.
Table 23
Property
UNITS
Aromatics
%Volume
Ash
%Weight
Carbon Residue on 10%
%Weight
Bottoms
-
Cetane Number
(2)
Cloud Point
°C
-
Copper Strip Corrosion
Density at 15 °C (59 °F)
(3)
kg/m
Distillation
°C
Flash Point
°C
-
Thermal Stability
Perkins Specification for Distillate Diesel Fuel
Requirements
35% maximum
0.01% maximum
0.35% maximum
40 minimum
The cloud point must not ex-
ceed the lowest expected
ambient temperature.
No. 3 maximum
3
801 minimum and 876
maximum
10% at 282 °C (539.6 °F)
maximum
90% at 360 °C (680 °F)
maximum
legal limit
Minimum of 80% reflectance
after aging for 180 minutes
at 150 °C (302 °F)
(1)
ASTMTest
ISOTest
D1319
ISO3837
D482
ISO6245
D524
ISO4262
D613/D6890
ISO5165
D2500
ISO3015
D130
ISO2160
No equivalent test
ISO 3675ISO 12185
D86
ISO3405
D93
ISO2719
D6468
No equivalent test
SEBU8732
(continued)