Driven Equipment - Check; Diesel Exhaust Fluid Filter - Clean/Replace - Perkins 1206F-E70TA Operation And Maintenance Manual

SEBU8732
Illustration 70
Typical example
1. Ensure that the DEF cap (1) and the surrounding
area is clean and free from dirt.
2. Remove the DEF cap from the tank.
3. Fill the tank with the required amount of DEF.
Ensure that dirt is not introduced into the tank
during filling. Do not over fill the tank. The DEF
may require room for expansion.
4. The opening on the DEF tank (2) is a special
diameter. Ensure that the correct nozzle is used
when filling the DEF tank.
5. Install the DEF cap.
Diesel Exhaust Fluid Filter -
Clean/Replace
g03417998
Illustration 71
1. Ensure that the area around the Diesel Exhaust
Fluid (DEF) filter is clean and free from dirt. Use a
27mm Bi-Hex socket in order to remove filter cap
(3).
2. Remove the expansion device (2). Use tool
supplied with new filter element in order to remove
expansion device. Remove filter element (1) from
main body (4).
3. Install new filter element (1) into main body (4).
Install expansion device (2) into filter element (1).
Install filter cap (3) and tighten cap to 20 N·m
(15 lb ft).
i04928595

Driven Equipment - Check

Refer to the OEM specifications for more information
on the following maintenance recommendations for
the driven equipment:
• Inspection
• Adjustment
• Lubrication
• Other maintenance recommendations
Perform any maintenance for the driven equipment
which is recommended by the OEM.
Maintenance Recommendations

Diesel Exhaust Fluid Filter - Clean/Replace

101
g03097598
i02151646