RAIS Q­-BIC Instructions Manual page 30

Q­-bic; q-bic insert
Table of Contents

Advertisement

When the flames are clear, after approximately 5­10 
minutes, close the door. 
Damper  ­  see adjustment of the damper. 
After approximately 10­20 minutes, when you have a 
good bed of glowing embers, add 2­3 pieces of wood. 
Leave the door ajar until the fire has caught properly, 
then close the door. 
Damper  ­  see adjustment of the damper. 
After approximately 5 minutes, or when the flames are 
clear and stable, close the damper gradually. 
It is recommended to have a layer of approximately 
20mm, as it has an insulating effect. 
NOTE! 
During operation the 
door should always 
remain closed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

PaloPilarQ­bic insert

Table of Contents