Cleaning the flue ways
The fixing clips are pushed up and removed from the
skamol on the side.
The fixing clips are positioned in the top right corner
of the firebox.
The picture on the left is a detailed view of the top
right corner of the firebox.
This is a close up view of the area is marked by a
circle in the next picture.
The baffle plate is pulled forwards and then
tipped down towards the firebox.
Note, the skamol on the sides are now loose.
The smoke connector is located above the baffle.
The picture on the left is taken from the bottom of the
firebox looking up.
The smoke connector is lifted free from the anchor
bolts and lowered at an angle towards the firebox.
Now there is a clear view of the flue.
Remove dirt and dust, then replace all of the parts in
reverse order.