FireBird Bio-Tec User Manual page 11

05 92
Parameter Factory
No. set-up
06 65
07 250
08 85
09 115
10 120
11 95
12 5
Temperature at which the boiler cooling will be activated
Description
Boiler temperature at which boiler pump (Laddomat) will
be activated
Maximum flue gases temperature permitted
Flue gases temperature level at which the burning
process stops when glow function is not activated
Flue gases temperature level at which the burning
process stops when glow function is activated
Boiler warming up period (minutes).
If combustion is not successful after this time, i.e. min flue
gas temperature is not achieved, then the boiler is
deactivated and the FUEL light goes on.
Maximum lower accumulator temperature
Minimal upper temperature difference between the first
accumulator and the room temperature in order to enable
the heating pump
Page 11