Draytek Vigor2860 Series User Manual page 43

Available settings are explained as follows:
Item
Host Name
MAC
Back
Next
Cancel
3. After finished the settings above, click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
Description
Type the name of the host.
Note: The maximum length of the host name you can set is
39 characters.
Some Cable service providers specify a specific MAC
address for access authentication. In such cases you need to
enter the MAC address.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
33
Vigor2860 Series User's Guide