Draytek Vigor2860 Series User Manual page 392

To edit a WALN profile, follow the step listed below:
1. Check the box of the entry that you want to edit. Then, click the Edit button.
2. The following page will appear. All the wireless connection related to Vigor Access Point
(e.g., AP800) will be shown as follows.
Available settings are explained as follows:
Item
Device Setting
WLAN General
Setting
Vigor2860 Series User's Guide
Then click Apply. The selected device now will be applied
with the selected WLAN profile.
Description
Profile Name – Type a name for such profile.
Administrator – Type the username for such profile. It will
be used for the clients trying to connect to the access point.
Password – Type a password for such profile. It will be
used for the clients trying to connect to the access point.
nd
2 Subnet – Click Enable to enable the second subnet.
Mode – Specify a connection mode for wireless network.
Channel – Specify a channel for the wirelss connection.
WMM – To apply WMM parameters for wireless data
transmission, please click the Enable radio button.
Tx Power - The default setting is the maximum (100%).
Lower down the value may degrade range and throughput
of wireless.
382