Management - Draytek Vigor2860 Series User Manual

3 . 1 7 . 1 0 M a n a
3 . 1 7 . 1 0 M a n a
This page allows you to manage the settings for access control, access list, port setup, and
SNMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session.
The management pages for IPv4 and IPv6 protocols are different.
F o r I P v
F o r I P v
Available settings are explained as follows:
Item
Router Name
Management Access
Control
Access List
Management Port Setup
Vigor2860 Series User's Guide
g e m e n t
g e m e n t
4
4
Description
Type in the router name provided by ISP.
Allow management from the Internet - Enable the
checkbox to allow system administrators to login from the
Internet. There are several servers provided by the system to
allow you managing the router from Internet. Check the
box(es) to specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
User Define Ports - Check to specify user-defined port
360