Destination IP
Destination Port
Send to if criteria
matched
More options
When you finish the configuration, please click OK to save and exit this page.
Vigor2860 Series User's Guide
Any – Any IP can be treated as the destination IP.
Dest IP Start- Type the destination IP start for the
specified WAN interface.
Dest IP End - Type the destination IP end for the specified
WAN interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
Any – Any port number can be treated as the destination
port.
Dest Port Start - Type the destination port start for the
destination IP.
Dest Port End - Type the destination port end for the
destination IP. If this field is blank, it means that all the
destination ports will be passed through the WAN interface.
Interface – Use the drop down list to choose a WAN or
LAN interface or VPN profile. Packets match with the
above criteria will be transferred to the interface chosen
here.
Gateway IP – Specific gateway is used only when you
want to forward the packets to the desired gateway.
Usually, Default Gateway is selected in default.
Auto Failover To The Other WAN – Check this button to
lead the data passing through other WAN automatically
when the selected WAN interface is down.
Packet Forwarding to WAN via – Choose Force NAT or
Force Routing.
134