Draytek Vigor2860 Series User Manual page 104

Confirm Password
Tunnel Broker
Subnet Prefix
After finished the above settings, click OK to save the settings.
D e t a i l s
D e t a i l s
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
Identify Association
IAID
After finished the above settings, click OK to save the settings.
Vigor2860 Series User's Guide
Type the password again to make the confirmation.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
Type the subnet prefix address getting from service
provider.
The maximum length of the prefix you can set is 128
characters.
P a g e f o r I P v 6 – D H
P a g e f o r I P v 6 – D H
Description
Choose Prefix Delegation or Non-temporary Address as
the identify association.
Type a number as IAID.
C P v 6 C l i e n t i n W A
C P v 6 C l i e n t i n W A
94
N 1 / W A N 2
N 1 / W A N 2