CVM Access Control
After finished the above settings, click OK to save the configuration.
F
o
r
I
P
v
6
F
o
r
I
P
v
6
Available settings are explained as follows:
Item
Management Access
Control
Access List
After finished the above settings, click OK to save the configuration.
numbers for the Telnet, HTTP and FTP servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
CVM Port – Check the box to enable such port setting.
CVM SSL Port – Check the box to enable such port
setting.
Description
Allow management from the Internet - Enable the
checkbox to allow system administrators to login from the
Internet. There are several servers provided by the system
to allow you managing the router from Internet. Check the
box(es) to specify.
Enable PING from the Internet -
to enable all PING packets from the Internet. For security
issue, this function is disabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)
allowed to login to the router.
361
Check the checkbox
Vigor2860 Series User's Guide