Draytek Vigor2860 Series User Manual page 20

Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB
VDSL2/ADSL
WAN2 (Giga)
GigaLAN (1-6)
Phone 1/2
Line
PWR
Vigor2860 Series User's Guide
LED
Off
Description
Press "Wireless LAN ON/OFF/WPS" button once to wait for
client device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to enable
(WLAN LED on) or disable (WLAN LED off) wireless
connection.
Restore the default settings. Usage: Turn on the router (ACT LED
is blinking). Press the hole and keep for more than 5 seconds.
When you see the ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with the factory
default configuration.
Connecter for a USB device (for 3G USB Modem or printer).
Connecter for accessing the Internet.
Connecter for local network devices or modem for accessing
Internet.
Connecters for local network devices.
Connecter for analog phone(s).
Connector for PSTN life line.
Connecter for a power adapter.
The port is connected with 10/100Mbps
10