Draytek Vigor2860 Series User Manual page 394

Security Setting
Access Control
Bandwidth Limit
Vigor2860 Series User's Guide
wireless clients (stations) with the same SSID not accessing
for each other.
Disable – There are several modes provided for you to
choose.
WPA Algorithm –Select TKIP, AES or TKIP/AES as the
algorithm for WPA. Such feature is available for
WPA2/802.1x, WPA/802.1x, WPA/PSK or WPA2/PSK
or Mixed (WPA+WPA2)/PSK mode.
Pass Phrase –Either 8~63 ASCII characters, such as
012345678..(or 64 Hexadecimal digits leading by 0x, such
as "0x321253abcde..."). Such feature is available for
WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK
mode.
Key Renewal Interval – Either 8~63 ASCII characters,
such as 012345678..(or 64 Hexadecimal digits leading by
0x, such as "0x321253abcde..."). Such feature is available
for WPA/PSK or WPA2/PSK or Mixed
(WPA+WPA2)/PSK mode.
PMK Cache Period –Set the expired time of WPA2 PMK
(Pairwise master key) cache. PMK Cache manages the list
from the BSSIDs in the associated SSID with which it has
pre-authenticated. Such feature is available for
WPA2/802.1 mode.
Pre-Authentication – Enables a station to authenticate to
multiple APs for roaming securer and faster. With the
pre-authentication procedure defined in IEEE 802.11i
specification, the pre-four-way-handshake can reduce
handoff delay perceivable by a mobile node. It makes
roaming faster and more secure (Only valid in WPA2).
Enable - Enable IEEE 802.1X Pre-Authentication.
WEP Key – Four keys can be entered here, but only one
key can be selected at a time. The format of WEP Key is
restricted to 5 ASCII characters or 10 hexadecimal values in
64-bit encryption level, or restricted to 13 ASCII characters
or 26 hexadecimal values in 128-bit encryption level. The
allowed content is the ASCII characters from 33(!) to
126(~) except '#' and ','. Such feature is available for WEP
mode.
802.1X WEP - Enable - Enable the WEP Encryption.
Mode (Black List/White List) – Select to enable black list
or white list filter policy.
List –Display all MAC addresses that are edited before.
Client's MAC Address –Manually enter the MAC address
of wireless client.
Add –Add a new MAC address into the list.
Delete –Delete the selected MAC address in the list.
Edit –Edit the selected MAC address in the list.
Cancel - Give up the access control set up.
Status – Click Enable to enable the function of bandwidth
limit.
384