Codec C90 Configurations - Cisco TelePresence PrecisionHD 1080P 12x User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

Codec C90 configurations

HD-SDI HDMI 1
Using the camera with Codec C90
Basic setup
Connect the HDMI cable:
•
From the HD VIDEO OUT (HDMI) connector on the camera.
•
To the HDMI 1 (HDMI ) connector on the Codec C90.
Connect the camera control cable:
•
From the CODEC CONTROL IN (RJ45) connector on the
camera.
•
To the CAMERA CONTROL (RS–232) connector on the
Codec C90. Visca™ protocol is supported.
Other configurations
The HDMI <1..4> and HD-SDI <1..4> connectors can be used for
the camera. The HDMI and HD-SDI can be used simultanously.
Connect the HD-SDI cable:
•
From the HD-VIDEO OUT (HD-SDI) connector on the
camera.
•
To the HD-SDI <1..4> connector on the Codec C90.
D14640.03 PrecisionHD 1080p-720p Camera User Guide TC4.0, November 2010.
© 2010 Cisco Systems, Inc. All rights reserved.
The physical interface Connecting the camera Connecting the camera
Camera
control
Video output formats
11
PrecisionHD Camera User guide
Daisy chaning Appendices
Codec connectors
1 Output connector
1 Input connector
www.cisco.com