Exhaust Bracket - PIAGGIO Beverly 250 USA Workshop Manual

Beverly 250 USA
Refitting
Carry out the previous operations but in reverse order.
Locking torques (N*m)
Shock absorber lower clamp 33 ÷ 41 Upper shock absorber clamp 33 ÷ 41

Exhaust bracket

Removal
- Loosen and remove the lower retaining bolt of the
right-hand shock absorber at the support arm.
- Loosen the 2 retaining screws between arm and
engine.
- Remove the split pin and safety cover; unscrew
the wheel axle nut; use the rear brake to prevent
the wheel from turning.
- Remove the support arm.
Remove the full muffler assembly.
See also
Exhaust assy. Removal
Exhaust assy. Removal
Overhaul
- Remove the circlip shown in the photograph
Suspensions
SUSP - 21